Wrightsville Beach to Myrtle Beach, SC

    It was a cool and grey day all day long today with temps in the low 50s. Cold work for the clamers working in the 50deg water near Holden Beach.

   This is another section of the ICW you would love to avoid if at all possible because of the shallow and shoaling inlets of Lockwoods Folly and Shallotte. Unfortunately for us the wind was from the south so it made more sense to stay in the ICW than head offshore into the wind/waves.
   Lockwoods Folly was a winding path with strong currents left and right, but the channel was deep and exactly as annotated on the chart plotter. We passed through with only white knuckles to show.
   Shallotte Inlet was another story. It started out ok, then we rounded the bend and spotted a dredge and work crews directly in the center of the channel ahead. From the dredge, pipes and lines and tugs went all the way to shore to the left. On the right side there were two temporary red bouys well outside the normal channel. A quick call on VHF channel 13 and the dredge captain told me to pass down his western side between him and a temporary yellow bouy (sending us outside the normal channel).  The waters went to 6ft deep (we draw 5), then quickly dropped to 12ft as soon as we passed the dredge. The rest of the Inlet passage has apparently been dredged as it was 12ft.

   Of course, to our disadvantage, it was low tide during the afternoon as we passed through the shallowest sections of the ICW in this area. Several times we had to nearly stop and relocate the channel, almost always over to the left of the charted position.

   We eventually arrived safely at Barefoot Landing, North Myrtle Beach just after 5pm and as darkness was descending. Our day was more successful than this sailor's day. Not sure how he ended up here (probably broke free from a mooring), but always a sad sight.
   We will be off early tomorrow for Georgetown SC and down the Waccama River, the prettiest section of the entire ICW. Looking forward to that leg.

Swansboro to Wrightsville Beach, NC

   Today's trek along the ICW is a section one likes to avoid, but the offshore weather wasn't accommodating. Between Swansboro and Wrightsville you first have to pass through the Camp Lejeune Firing Range. Normally it is not active and no problem but this morning the yellow lights were flashing. Fortunately the firing hadn't started yet and the Navy patrol boat told us to pass through "transit only - no stopping."  Fine with us.

   The next challenge is 4 bridges to pass through which are on restricted schedules, meaning they only open on the hour (or hour and half hour for two of them) which forces you to set your speed to arrive at opening times and basically slows you down one hour along the day's transit. That means you can't get to Carolina Beach Park where we would like to stop.

   Since we couldn't reach Carolina Beach Park, we are anchored in the anchorage area around the corner in Wrightsville Beach area. Its a nice protected anchorage area. Normally a very busy anchorage during transit times (April and October) but pretty empty in Jan.  There was one boat already anchored and one more sailboat followed us in, so there are 3 of us for the night. Tomorrow we'll head out early and should make it to Myrtle Beach area.  Still looks like Friday before we can get out to sea.
   Overcast and a few showers throughout the day today, and forecasted for tonight/tomorrow, but the temperature is in mid 50s so not too bad. Better than the snow showers in Wash DC!

River Dunes to Swansboro, NC

   Here's a view of the luxurious clubhouse at the River Dunes Marina. Office, library/reading rooms and game room downstairs, restaurant upstairs. Pool to the left and exercise/showers to farther left. Their winter rates made staying here for the night a nice treat, especially the hot showers.

   Tides Inn looks a little small tied up in the 80ft slip at River Dunes, next to the 65ft Viking. Good thing I have 2 50ft power cords as it was that far to the power outlet.

   We ended the day at Dudley's Marina in Swansboro. Not quite the same amenities as River Dunes, but I like this place ever since I arrived here in 2004 on a broken delivery boat and the folks here bent over backwards to help us out.  The only problem at Dudley's is the barnacles/shells attached to the poles. You have to be careful to keep fendered well off the poles and away from the sharp shells.

   Passed the mile 200 point today after only four and a half days. Boat travel is not the fastest mode of transpo!  We will be confined to the ICW until Friday, it appears from weather forecast, so should be able to log another 200 miles by then.  Looks like we may be able to get out on the ocean Friday at Georgetown, SC.
   Meanwhile all is going well. Temperature is up to mid 60s. Genny is back in the swing of potty trips to the bow.  All is well on Tides Inn.

Crossing the North Carolina Sounds

   Had a great day today for crossing the Pamlico River and Sound. Temp in the 60s and a 5-10kt breeze just off the bow enough to let us motor sail at a good clip. We arrived at River Dunes Marina just before sunset and navigated the winding channel full of crab pot floats/lines successfully.  Not a place to come into at night. Entrance channel was 6ft, not 8ft as advertised. Very fancy place - will post pictures tomorrow.

   This is where we spent last night, anchored just before entrance to Alligator-Pungo Canal at MP103. This is a popular anchorage for ICW transitors but, funny, we were the only ones there on 6-7 Jan.  Not an unpleasant night. Temp was 49 this morning. Decided not to dig out the generator to run a heater, just jumped under 4 blankets.

   Once the anchor's down and dinner's over its time for dominos. Sue loves her new chair (her Sailrite sewing machine with pad and cover).  Just right for our small table the sits under the main salon table (folded up).

   We got in several games before the temperature began dropping and it was time to jump in bed - 0730pm.  Got in a good nights sleep before rising at 0600 for today's long run to River Dunes.

   Tomorrow is supposed to be same weather as today, but chance of rain after midnight. We hope to get past Camp Lejeune to Swansboro tomorrow. Hopefully another warm day we can open the dodger center window like this which greatly improves visibility.
    All going smoothly so far.

On to Coinjock, NC

   It was a short leg today from Great Bridge to Coinjock, only about 40 miles. But, the next marina along the Intracoastal Waterway is another 35 miles and we couldn't make it before dark - and its always difficult getting into an unfamiliar marina in the dark (and cold), so best to stop early and relax.
   This is Midway Marina in Coinjock, on west side of ICW. Not much to do in Coinjock, just tie up and turn on heater.  Weather is in mid 50s, so we'll go for a walk later.

   For those new folks following our blog (Greg's friends), this is Tides Inn, our Island Packet 380 cutter rig sailboat. Island Packet makes, IMHO, the best cruising sailboats with lots of storage space, a shallow keel for getting into out-of-the-way places, and a full keel and staysail rig for comfortable and safe ride in a blow. Ask Gregory about 55kts and 18ft seas in the Delaware Bay.

   We have a lot of cruising gear hanging off the stern which unfortunately lowers the stern and slows us down some, but makes cruising for months in the islands very enjoyable. We have two solar panels for charging the batteries and a wind generator for when the sun doesn't shine (rare). We have dinghy davits for carrying the dinghy in the islands (we roll and store it on deck for ocean transits so big waves don't rip it off). Our Yamaha dinghy engine sits on the stern rail and barbeque grill is hanging on stbd quarter.

    This is a typical view of the ICW through northern sections of NC as you head down North Landing River through Coinjock, to Albemarle Sound, Alligator River, Pungo River and Pamlico Sound/Neuse River until you finally arrive at the Atlantic Ocean at Beaufort.  A lot of this area is outside of any cellphone coverage, so there won't be a blog update tomorrow.

   Milepost 45, just before Coinjock. The ICW starts at Norfolk at MP 0 and ends around the Texas/Mexico border, with a few gaps in the Gulf area. We'll try to head offshore off NC if weather allows and come back into ICW at Miami to cruise around Biscayne Bay (MP 1095) for couple weeks.  Only 1050 miles to go! (at 7.5 mph)

   Here's a "real sailor" we passed along the way with no dodger, bimini or enclosure - just his foul weather gear to keep warm.
  
   Tomorrow night we'll be roughing it, anchoring out at entrance to Alligator River Canal. Supposed to be in mid 40s Fri night so not that cold. Sat we'll be at River Dunes Marina and will have wifi and can update the blog.

Underway for Bahamas - Finally

   We are finally underway and heading south, departing 7am on 4 Jan, sailing into the rising sun on a crisp 20deg morning.
   Our plan was to leave yesterday, but waking to 28-34kt winds and 4-6ft seas in Chesapeake Bay convinced us to wait another day.
 

  
   Good decision. This morning we gathered all dock lines in zero wind and heading out into 1ft waves and following tide.  Fast trip down the bay to Norfolk with 10kt winds on the aft quarter.
   The cockpit enclosure is a great success, and essential for winter sailing. We had a very comfortable ride with no wind chill factor.

   That's ice on the outside of the enclosure from sea water kicked up from exhaust. Its about 52 inside the cockpit and 32 outside.  That's about about 30 degrees (including wind chill factor) more comfortable. Very nice in the sun. Got to put my heavy foul weather jacket back in the closet.

   There was alot of commercial traffic in Hampton Roads harbor. We stayed over on the "red" side just outside the deep water channel bouys. Was especially important as we passed by an outbound submarine "Event A" escorted by the USCG maintaining a 500yd security zone with "deadly force" authorized.

   Even after clearing the merchant anchorage area and naval base we still had to watch out for lots of tug traffic. These containers are probably heading for Baltimore after being unloaded from a ship in Norfolk.

   By noon we were passing by Norfolk Waterside and heading down the Elizabeth River. Not as much traffic anymore, but still some barges and security boats off the Naval repair yards.

   Genny is enjoying her trip and very appreciative of the enclosure where she can sit in the sun and enjoy the warm rays on her brown hair.

   Mid-afternoon and we're tied up at Atlantic Yacht Basin. Time for some reading in the cockpit. Sue's a little overdressed for the conditions, but she just came in from outside where it is still in 30s.

   Yep, still cold out there.  Those are icicles hanging down from the fender.
   Supposed to be 40s tomorrow, then into the 50s and we'll keep making further progress south.  Come on warm weather.
   On to Coinjock tomrrow - assuming we can get through the Centerville Bridge which was closed all day today for mechanical malfunction.

Last week of preparations

  Its the last week of preparations for our departure south and we have two major jobs to complete before the final provisioning and departure.
   Sue is working hard making us a full enclosure for the cockpit which will keep the cold winter winds off us as we head down the Intra-Coastal Waterway - at least to North Carolina - in January.

  With all the curves and obstacles in the cockpit dodger and bimini and backstays and davit supports, the enclosure is a very complicated task.  Here's a photo of two side pieces in the process of fitting. First the tops are attached, then the side zippers added and, finally the bottoms attached to the cockpit coaming. Looks like we will be finished on Friday.

   My job is to repair the wind generator - it needs new bearings installed.  Seems that when I removed my brand new expensive wind blades for the couple months the boat was in the boatyard (so they wouldnt be damaged by hurricanes or the boatlift), removing the blades and hub exposes the bearings to the rain. The cheap bearings rusted and were ruined.  I bought stainless steel bearings to replace them. Now just have to get the machine apart to replace them.

   I was able to get the wind generator off the pole and work on it in cockpit.  Old bearings out, new bearings pressed in later in day.  Now just need to reassemble it on Friday morning.  Still looking good for departure this weekend.

Solar Panel Installation

   My last big addition to the boat - 2 Kyocera 135 solar panels. Greg and I start assembling the panels on the dock.

   The panels will be mounted on two aluminum support bars. If you look closely at the center of the bar you can see the Kato pivot support I am attaching to the bar (its in the slot between dock decking) which will mount on our Kato solar mounts.

   The panels, attached to the support bars with pivot hardware, will attach to the supports mounted on the Kato dinghy davits. We just have to thread the panels through the backstays/wind gen mount etc, and hold them out at arms length over the stern and line up the screw holes.

   It was a challenge, but we got them installed without dropping anything in water. Amazing. Could have used a third person.  Now its time to secure the wiring.
   This is a good view of the Kato solar panel pivot mounts that allow you to orient the panels towards the sun.

   Mission accomplished, at least for the external mounting. Now I need to finish up the below decks wiring.  The Bluesky regulator is mounted in the starboard lazerette, a circuit breaker cut off switch at the engine control panel.  The wiring connects to the 110v battery charger posts in lazerette.
   The Bluesky regulator has an external display monitor to be mounted at the nav table. It connects via a standard telephone cable (50ft) that I have to install next.
   This is a neat installation with panels out of any shadow zone. The only downside is 60lbs mounted behind the boat which lowers the stern another 1/2in or so. Not good for my boat which is already stern heavy. But then we are cruisers, not racers.  With 270watts of solar plus the AirX windgenerator with new high tech blades, we should be all set for generating electricity.