Boot stripe finally finished. I didn't realize it was going to be such a job (actually, I knew it was going to be difficult given that I was trying to get it as perfect as the original professional job). It came out much better than my first attempt several years ago (tried to paint when it was 100degs outside - big mistake). We rolled and tipped as a team of two, using Interlux Primecoat and 333 brushing thinner.
Our main challenge was covering up the white primer paint underneath. It took 3 coats (thinned to ensure they flowed properly) to cover the white. I later saw the professionals mix a little topcoat with the primer to make it light blue and easier to cover. I also had difficulty avoiding runs under the thru-hulls, which require sanding out (exposing the white primer again) and a challenge blending in with the existing paint. Now we'll let it dry couple days, then tape off and bring the bottom paint up to the edge.
While we wait for the paint to dry harder, its on to the next project...
